Dubuque, IA Free Moderated Classifieds Site   >   OLD ADS FROM PREVIOUS YEARS   >   2001   >   December   >   Fluke t+pro ac/dc multi-function electrical tester

Fluke t+pro ac/dc multi-function electrical tester

Fluke T+ PRO / T+ Electrical Testers
Fluke T+ PRO / T+ Electrical Testers
Safer than traditional solenoid testers and fully compliant with NFPA 70E*
The T+PRO and T+ Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers:
* Both have three ways to detect ac/dc voltage: light, sound, and vibration
* Both offer the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight
* The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing
Safer than traditional solenoid testers:
* CAT IV 600 V, CAT III 1000 V rated
* When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.
Added functionality available only on the T+PRO:
* Backlit LCD display for easier viewing
* Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
* Resistance (Ohms) to 9.99 kOhms
* Display Hold for easier viewing in hard-to-test areas
Features and benefits of the T+PRO and T+:
* 3 forms of ac/dc voltage indication: light, sound, and vibration for added user protection and convenience
* Detect live voltage even when the batteries are dead
* Extra heavy-duty, replaceable test leads for more flexibility and durability
* CAT IV 600 V, CAT III 1000 V rated for added user protection
* Bright LED flashlight for work in poorly lit areas
* On/Off switchable beeper, selectable according to your environment
* Compliant with latest NFPA 70E recommendations*
* Replaceable test probes for added flexibility and convenience
* Convenient probe storage on the back
* Probe holder for easier testing
* Hazardous voltage warning light for added user protection
* Test lead strap included for better test lead management
* AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V – 600 V on LCD (LCD on T+PRO only)
* Auto-off saves battery power
-10 °C to 55 °C (14 °F to 131 °F)
-30 °C to 60 °C (-22 °F to 140 °F)
0 °C to 30 °C (32 °F to 86 °F): 90 %
30 °C to 40 °C (86 °F to 104 °F): 75 %
40 °C to 50 °C (104 °F to 122 °F): 45 %
10,000 m (approx. 32,808.4 ft)
Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV
Indefinitely for voltages up to 240 V
For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
LEDs turn on at voltages > 30 V ac/dc ± 35 %
12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
LED voltage indication levels for Canadian version
12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V
LEDs turn on between 90 % and 100 % of the indicated voltage on the LED, except for the 12 V LED which turns on between 50 % and 100 %
0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V
0.01 kΩ for resistance measurement (For T+PRO Only)
100 V - 150 V @ 6 mA - 9 mA ac, 150 V - 240 V < 12 mA
1.3 in x 2.15 in x 7.6 in (3.3 cm x 5.46 cm x 19.3 cm )
Fluke t+pro ac/dc multi-function electrical tester